产品详情

1646

平衡线路驱动器THAT1646/1606输出级IC

产品中心
联系我们

产品分类

型号:THAT1606/1646
控件[tem_25_34]渲染出错,Source:未将对象引用设置到对象的实例。

THAT 1606/1646
Balanced Line Driver ICs

FEATURES
High-current differential output driver
Balanced, transformer-like floating output
+6.0dB gain, balanced or single-ended termination
OutSmarts technology tames clipping
 into single-ended loads
Stable driving long cables and capacitive loads
High output: +28dBu into 600 Ω
Low noise: -101 dBu
Low distortion: 0.0007% @ 1kHz
Industry-standard pinout (1646)
Differential input (1606)

特征
大电流差分输出驱动器
平衡变压器式浮动输出
+ 6.0db增益,平衡或单端终止
智胜科技驯服裁剪
单端负载
稳定驱动长电缆和容性负载
产量高:+ 28dbu为600Ω
低噪音:101业务
低失真:0.0007% @ 1kHz时
行业标准引脚(1646)
差分输入(1606)

APPLICATIONS
Differential Line Drivers
A/D converter Drivers
Audio Mixing Consoles
Distribution Amplifiers
Hi-Fi Equipment
Telecommunications Systems
Instrumentation

应用
差动线路驱动器
A/D转换器驱动程序
调音台
分配放大器
音响设备
电信系统
仪器仪表

DESCRIPTION
The THAT 1606 and 1646 are a new generation of monolithic differential line drivers offering improved performance over conventional cross-coupled designs. Based on a high-performance, fully differential op amp and laser-trimmed thin-film resistors, both families exhibit low noise and distortion, high slew rate, and wide output swing. The parts are stable when driving difficult loads, and have short-circuit protected outputs. Both models incorporate THAT's patented OutSmarts technology. Outsmarts is a dual feedback-loop design that prevents the excessive ground currents typical of cross-coupled output stages (CCOS) when clipping into single-ended loads.

The 1646 is pin-compatible with the TI DRV134 and DRV135, as well as the Analog Devices SSM2142.

The unique 1606 offers differential inputs, a space-saving connection to minimize output dc offset, and comes in a special 16-pin QSOP which improves power dissipation without sacrificing footprint.

描述
这1606和1646是新一代的单片差分线路驱动器,提供了比传统的交叉耦合设计更好的性能。基于高性能,全差分运算放大器和激光微调薄膜电阻,两个家庭都具有低噪声和失真,高转换率和宽输出摆幅。当驱动困难负载时,部件稳定,并具有短路保护输出。这两种模式结合的专利技术,打败了。智取是双反馈回路的设计,防止过度的接地电流的典型交叉耦合输出阶段(CCOS)当裁剪成单端负载。

1646是TI drv134和drv135引脚兼容,以及模拟设备SSM2142。

独特的1606提供差分输入,节省空间的连接来减少输出直流偏移,是在一个特殊的16引脚QSOP提高功耗而牺牲的足迹。

控件[tem_25_34]渲染出错,Source:未将对象引用设置到对象的实例。